Search found 1517 matches
- Fri Jun 24, 2011 6:49 pm
- Forum: The Pattern Shop
- Topic: cart for my engine
- Replies: 24
- Views: 12752
Re: cart for my engine
I used Limestone from the driveway in the assumtion that is makes the slag fluid and reduces the acidity so it's not so hard on the crucible. We use it in the Electric Arc furnace at work for Steel, along with anthracite coal as a cover. One of my jobs is to test the slag for acidity and for the lev...
- Thu Jun 23, 2011 11:59 am
- Forum: The Pattern Shop
- Topic: cart for my engine
- Replies: 24
- Views: 12752
Re: cart for my engine
Yes, dedicate a crucible for Iron. It won't be much good for anything else. A little charcoal cover, some Limestone(dry) for flux and a little FeSi, if you can find some, to help with fluidity. Or, just use thin castings in the melt, they should be pretty high Silicon.
- Wed Jun 22, 2011 8:32 am
- Forum: The Pattern Shop
- Topic: cart for my engine
- Replies: 24
- Views: 12752
Re: cart for my engine
Nothing to Fear, but Fear it's self!
- Mon Jun 20, 2011 5:10 am
- Forum: Forum Suggestions
- Topic: Suggestions thread/forum?
- Replies: 5
- Views: 4841
Re: Suggestions thread/forum?
That sounds OK, and making it a sticky would help. I was just trying to think of a way to just have links and a description without looking through several pages of posts.
- Sun Jun 19, 2011 1:53 pm
- Forum: Forum Suggestions
- Topic: Suggestions thread/forum?
- Replies: 5
- Views: 4841
Re: Suggestions thread/forum?
Harry, how about a links thread that would be locked and links added by you with a small description of what's there? Maybe like the gallery section with a sub-thread for suggested links. Other shops and info sites, where to buy parts or supplies (including yours) :D . Good You-tube videos or albums...
- Sun Jun 19, 2011 7:22 am
- Forum: Introductions
- Topic: Hello from the US South/west desert
- Replies: 4
- Views: 2855
Re: Hello from the US South/west desert
Welcome aboard, Sounds like you'll fit in just fine.
- Sat Jun 18, 2011 2:32 pm
- Forum: Iron Gallery
- Topic: Old Industry
- Replies: 38
- Views: 22805
Re: Old Industry
I believe that was talking about the sandstone for the structure. I was curious about where the Firebrick came from. I know there is a Magnasite mine in southern Ohio and one in York Pa. I don't know if these were used back in the 1800's. They brought masons from Italy to built the original furnace ...
- Sat Jun 18, 2011 1:40 pm
- Forum: Lifting, Pouring and Skimming
- Topic: Tool Set for a #10 SiC
- Replies: 3
- Views: 4686
Re: Tool Set for a #10 SiC
Does the monogram on the rebar say 19 ... 5? That would be a grade 75 #6 rebar, pretty strong stuff. Can't imagine it was very easy to weld.
The tools look great, might get heavy at the end of the day.
The tools look great, might get heavy at the end of the day.
- Sat Jun 18, 2011 10:12 am
- Forum: Introductions
- Topic: Hi from the south pacific
- Replies: 23
- Views: 13230
Re: Hi from the south pacific
That Bob is sneaky. But, I guess he could have stayed ANONamous.
The wax has a lot of flash but it's easy to trim off. I'm hoping I can bring back some of the detail of the face, maybe even a self portrait.
The wax has a lot of flash but it's easy to trim off. I'm hoping I can bring back some of the detail of the face, maybe even a self portrait.
- Sat Jun 18, 2011 8:27 am
- Forum: Introductions
- Topic: Hi from the south pacific
- Replies: 23
- Views: 13230
Re: Hi from the south pacific
Hi Oldsalt, Welcome aboard!! 8-) I sent mine on to someone, I don't remember who... Maybe Nudge?? I cast about 6 of them, most weren't very good. I also made a Poly mold to use for wax patterns. http://i183.photobucket.com/albums/x310/Jammer_55/Foundry%20Buckle/IMG_1074.jpg http://i183.photobucket.c...