Re: Coaster Project
Posted: Sun Mar 16, 2014 5:42 pm
Like this? A little more dazzle on the lettering, maybe... ??
Found Dreaming
The Foundrymans Resource
http://founddreaming.com/metal_casting/forum/phpBB3/
Coaster Project
http://founddreaming.com/metal_casting/forum/phpBB3/viewtopic.php?f=3&t=478
Page 3 of 5
Re: Coaster Project
Posted: Sun Mar 16, 2014 6:11 pm
Looks great Jerry, could you move the date closer to the bottom so that when a glass is sat on it it sits square
Re: Coaster Project
Posted: Mon Mar 17, 2014 1:47 am
Jerry where have 24th of may I would think about 4 inches across, and maybe 24 of may lower with 2014 on the bottom and as you suggest maybe a bit more dazzle on the lettering
Mike
Mike
Re: Coaster Project
Posted: Wed Mar 19, 2014 10:17 am
I tried this out. Would you know what typeface they are using on the announcements? Ask your wife!! 
It would be nice to try to match it all up.
It would be nice to try to match it all up.
Re: Coaster Project
Posted: Wed Mar 19, 2014 1:41 pm
PM sent Jerry.....What you have is starting to look great 
Mike
Mike
Re: Coaster Project
Posted: Fri Mar 28, 2014 8:55 am
I found a Typeface that is very close. Trying a few things to get it to clean up well. You may have a little chasing to do on the cast. Do you want anything changed at all? They are about 120mm tall and 120mm wide, I can change that pretty easily if you want.
Re: Coaster Project
Posted: Fri Mar 28, 2014 10:35 am
Everything looks fine to me Jerry , I would expect some chasing mate
Mike
, I would expect some chasing mateMike
Re: Coaster Project
Posted: Fri Mar 28, 2014 10:39 am
One thing Jerry, could slightly round the pointy end of the heart please
Mike
Mike
Re: Coaster Project
Posted: Fri Mar 28, 2014 4:42 pm
On the outer and inner heart on each, or just the outer?
Re: Coaster Project
Posted: Fri Mar 28, 2014 10:52 pm
Both if you can JerryJammer wrote:On the outer and inner heart on each, or just the outer?