Casting and Blacksmith school at Tannehill

Providing or Needing a Service?
Post Reply
User avatar
Jammer
Posts: 1487
Joined: Thu Jun 02, 2011 4:04 pm
Location: Ohio

Casting and Blacksmith school at Tannehill

Post by Jammer »

I don't have much info on this but they have a nice set-up.
A large blacksmith shop and school area. Also, 3 cupola furnaces and a crucible furnace. You can make up a sand mold and cast items. There's a jolt squeeze, petrobond and resin sand. I guess I didn't get a shot of the Blacksmith shop, just some of the anvils for students.
Image
Image
Image
Image
Image
quando omni flunkus moritati 8-)
User avatar
Nudge
Posts: 305
Joined: Sun Jun 05, 2011 6:18 pm
Location: Auckland, New Zealand

Re: Casting and Blacksmith school at Tannehill

Post by Nudge »

Just seen these pics! Looks like a fun day out. :) I could spend all day +++ looking at things like that.
Is the furnace in the second pic still used?
I like to build "Stuff" using Stuff that costs Stuff All!
User avatar
Jammer
Posts: 1487
Joined: Thu Jun 02, 2011 4:04 pm
Location: Ohio

Re: Casting and Blacksmith school at Tannehill

Post by Jammer »

http://www.alaforge.org/

They have a Blacksmith meeting coming up in Sept. I think the second picture (the one after the jolt-squeeze) is the only one they use. The Octaganal one is small and hard to operate and the one with the black top needs a reline. They cast Iron once or twice a year, I think. It's a little far for me, really far for you! :)
If you like looking at pictures, here's a site you'll like. It has almost all the museum in it. also, several links to keep us busy for a while. I may save most of it for wintertime.

http://www.civilwaralbum.com/misc14/tannehill1.htm
quando omni flunkus moritati 8-)
User avatar
Nudge
Posts: 305
Joined: Sun Jun 05, 2011 6:18 pm
Location: Auckland, New Zealand

Re: Casting and Blacksmith school at Tannehill

Post by Nudge »

Sweet as for the link. thanks!
I like to build "Stuff" using Stuff that costs Stuff All!
archaic caster
Posts: 11
Joined: Mon Jun 06, 2011 1:40 pm
Location: suffolk, Virginia

Re: Casting and Blacksmith school at Tannehill

Post by archaic caster »

by god that couplet is large almost as large as the copula i was building not 20 foot from those ones this past weekend. 16 inches duel rows of tweers (10 total). that comes out to 300 ish pounds of iron every 20 mins :twisted: :twisted: :twisted: we ran a 10 incher 3 weekends ago at a slimier furnace in north Carolina. i love molten iron( almost as much as the 30 tons of steel we do at work)
edit:they have a website aswell i want to say its something like alabama art casting.
User avatar
Jammer
Posts: 1487
Joined: Thu Jun 02, 2011 4:04 pm
Location: Ohio

Re: Casting and Blacksmith school at Tannehill

Post by Jammer »

http://www.youtube.com/watch?v=2puZHcq6 ... el&list=UL

The only thing I find is a video from 2008.
quando omni flunkus moritati 8-)
User avatar
Jammer
Posts: 1487
Joined: Thu Jun 02, 2011 4:04 pm
Location: Ohio

Re: Casting and Blacksmith school at Tannehill

Post by Jammer »

Do you mean you were at Tannerhill, building a cupola? Sounds like a nice large furnace. Would you have the plans or some drawings of the cupola?
quando omni flunkus moritati 8-)
archaic caster
Posts: 11
Joined: Mon Jun 06, 2011 1:40 pm
Location: suffolk, Virginia

Re: Casting and Blacksmith school at Tannehill

Post by archaic caster »

That there is a long story it was supposed to be done before we left however you know what they say about the best laid plans. So yes i was there and yes we built or finished the furnace however we are having to take it back to the board because it bridged on us with the first charge
User avatar
Jammer
Posts: 1487
Joined: Thu Jun 02, 2011 4:04 pm
Location: Ohio

Re: Casting and Blacksmith school at Tannehill

Post by Jammer »

I imagine that bridging can be caused by several different factors. Sounds like a hassle. I wish I could get back down there, shoot, I'd live just outside the gate if I could. Anyone want to buy a house in Central Ohio?
quando omni flunkus moritati 8-)
Post Reply