Everdur Bronze Casting

All About Showing Off, This is why we do what we do.
User avatar
Jammer
Posts: 1487
Joined: Thu Jun 02, 2011 4:04 pm
Location: Ohio

Re: Everdur Bronze Casting

Post by Jammer »

Here's the molds and the ones I cast with Lead. They range from 12 oz for the small bulb, 2 lbs for the large bulb, 3 lbs for the small sphere, and 3 lbs 12 oz. for the large sphere. The spheres were the only ones that wanted to leak out the vent holes. The small one I had to stop pouring so it could seal and then finish pouring. Caused a small ring around the globe.
Just fun to melt something. :)
Attachments
IMG_0003.JPG
IMG_0007.JPG
IMG_0012.JPG
IMG_0014.JPG
quando omni flunkus moritati 8-)
chucketn
Posts: 15
Joined: Tue Sep 17, 2013 12:22 pm
Location: Jonesborough, TN

Re: Everdur Bronze Casting

Post by chucketn »

Nice! Glad to see you working. I can't get motivated to get off my butt!

Chuck
MicroMark 7x14 lathe, X2 mill, 4x6 bandsaw, small foudry
User avatar
Jammer
Posts: 1487
Joined: Thu Jun 02, 2011 4:04 pm
Location: Ohio

Re: Everdur Bronze Casting

Post by Jammer »

Chuck, what would you like? A block of bronze or a round rod. Let me know what size if you have a project in mind.
quando omni flunkus moritati 8-)
chucketn
Posts: 15
Joined: Tue Sep 17, 2013 12:22 pm
Location: Jonesborough, TN

Re: Everdur Bronze Casting

Post by chucketn »

Doesn't matter. No project, just something to play with.
MicroMark 7x14 lathe, X2 mill, 4x6 bandsaw, small foudry
Post Reply