Here we go.
A normal pattern, nothing special.
DIY greensand ,
Large grains, help in a better degassing casting
Working on the lathe.
And here is ready, together with the 88mm piston.
motorcycle parts.
- GypsyTinker
- Posts: 84
- Joined: Mon Jun 06, 2011 12:56 pm
Re: motorcycle parts.
absolutely lovely work!
Thanks for posting this!
Thanks for posting this!
Only the highest standards of precision!
Re: motorcycle parts.
Very nice Seba, looking at the pictures I was thinking what is this and man that is a thick casting and when I saw the ones after the lathe work it all came together. Does the cylinder take a liner?
I'd rather laugh with the sinners than cry with the saints the sinners are much more fun...
Muller
Muller
- GypsyTinker
- Posts: 84
- Joined: Mon Jun 06, 2011 12:56 pm
Re: motorcycle parts.
looks like a press fit steel liner...
I guess those 4 bold holes hold the head on, I imagine they are connected to the steel?? o.O
Backside of the fins flat to make way for push rods?
I guess those 4 bold holes hold the head on, I imagine they are connected to the steel?? o.O
Backside of the fins flat to make way for push rods?
Only the highest standards of precision!
Re: motorcycle parts.
Here, the engine 350ccm
This on top will be 500ccm .
In the American style, no power, so we put a large pistons
This on top will be 500ccm .
In the American style, no power, so we put a large pistons
Re: motorcycle parts.
Sweet ... Keep us posted, I'm keen to see more.
I like to build "Stuff" using Stuff that costs Stuff All!
- GypsyTinker
- Posts: 84
- Joined: Mon Jun 06, 2011 12:56 pm
Re: motorcycle parts.
Lovely! it looks right at home Great work
Only the highest standards of precision!
- 4cylndrfury
- Posts: 140
- Joined: Thu Jun 02, 2011 10:09 am
- Location: Cincinnati, Ohio, USA
Re: motorcycle parts.
Amazing work. I REEEAALLLLY need to get started on a lathe. That just turned out great. Pun intended
"Simplicity is the ultimate sophistication"
-Leonardo Di Vinci
"The future's uncertain and the end is always near...."
-Jim Morrison
-Leonardo Di Vinci
"The future's uncertain and the end is always near...."
-Jim Morrison
Re: motorcycle parts.
Nice job! What kind of motorbike is it? Seem to be quite old and in very well condition...
- GypsyTinker
- Posts: 84
- Joined: Mon Jun 06, 2011 12:56 pm