Cincinnati Shaper

[latzanimal]

[dallen]

let's see if Richard can figure out what this is

[Rasper]

It looks like it might be a .45-70 Sharps.

Are you making one? The world needs more Allen rifles.

Richard

[Jammer]

You've been working on something, not just sitting around like me. Looks like a Sharp's. I had to google some pictures.

[dallen]

its and 1874 sharps rifle action, not sure what caliber it will be, probably 50/90 as I have the reamer to cut the chamber with, anything else would mean that I would have to buy a reamer, which I don't want to spend the money of one.

[dallen]

Ok I did some metal casting, of little round lead shape objects. Used a friends antique reloading tool which has the bullet mold on the front end.

110 grain slugs for the H. Pieper that I have been working on for a while now.

[Jammer]

Shiney!

[mite5255]

Very very shiney

[dallen]

here's a photo of a part and the tool to install it with that I had to make. Was fun drilling those 3/64" holes with a carbide drill bit in the end of the 1/4 inch diameter screwdriver shank.

IMG_20171201_200122.jpg (67.89 KiB) Viewed 4737 times

[Jammer]

Every time I tried to make another tool from a screwdriver I would break off the plastic handle.